Defining Interface Settings - Cisco ESW 500 Administration Manual

Configuring VLANs

Defining Interface Settings

Defining Interface Settings
STEP 1
ESW 500 Series Switches Administration Guide
VLAN Interface Setting Page
The
part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN
Settings
page. All untagged packets arriving to the device are tagged by the ports
PVID.
Click VLAN & Port Settings > VLAN Management > Interface Settings. The
Interface Settings Page
VLAN Interface Setting Page
VLAN Interface Setting Page
The
•
Copy From Entry Number — Copies VLAN configuration from the specified
table entry.
•
To Entry Number(s) — Assigns the copied VLAN configuration to the specified
table entry.
•
Ports — Indicates that ports are described in the page.
•
EtherChannels — Indicates that EtherChannels are described in the page.
provides parameters for managing ports that are
opens:
contains the following fields:
7
Port
VLAN
218