Aggregating Ports
Defining EtherChannel Settings
STEP 2
STEP 3
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
•
Flow Control — Displays the current Flow Control setting. Flow control may be
enabled, disabled, or be in auto negotiation mode. Flow control operates
when the ports are in full duplex mode.
•
PVE — Indicates that this EtherChannel's ports are protected by an uplink, so
that the forwarding decisions are overwritten by those of the ports that protect
them.
Define the relevant fields.
Click Apply. The EtherChannel Settings are defined, and the device is updated.
Modifying EtherChannel Settings
Click VLAN & Port Settings > Port Management > EtherChannel Settings. The
EtherChannel Settings Page opens.
Click the Edit button. The
Edit EtherChannel Page
Edit EtherChannel Page
The
Edit EtherChannel Page
contains the following fields:
opens:
18
418