Resetting Interface Statistics Counters; Viewing Etherlike Statistics - Cisco ESW 500 Administration Manual

Viewing Statistics
Viewing Ethernet Statistics
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
-
60 Sec
— Indicates that the Ethernet statistics are refreshed every 60
seconds.
-
No Refresh
The Receive Statistics area contains the following fields:
•
Total Bytes (octets) — Displays the number of octets received on the interface
since the page was last refreshed. This number includes bad packets and FCS
octets, but excludes framing bits.
•
Unicast Packets — Displays the number of good Unicast packets received on
the interface since the page was last refreshed.
•
Multicast Packets — Displays the number of good Multicast packets received
on the interface since the page was last refreshed.
•
Broadcast Packets — Displays the number of good broadcast packets
received on the interface since the page was last refreshed.
•
Packets with Errors — Displays the number of packets with errors.
The Transmit Statistics area contains the following fields:
•
Total Bytes (octets) — Displays the number of octets transmitted on the
interface since the page was last refreshed. This number includes bad packets
and FCS octets, but excludes framing bits.
•
Unicast Packets — Displays the number of good Unicast packets transmitted
on the interface since the page was last refreshed.
•
Multicast Packets — Displays the number of good Multicast packets
transmitted on the interface since the page was last refreshed.
•
Broadcast Packets — Displays the number of good broadcast packets
transmitted on the interface since the page was last refreshed.

Resetting Interface Statistics Counters

Click Statistics > Ethernet > Interface. The
Click the Clear Counters button. The interface statistics counters are cleared.

Viewing Etherlike Statistics

Etherlike Page
The contains interface statistics.
— Indicates that the Ethernet statistics are not refreshed.
Ethernet Interface Page
17
opens:
388