Cisco ESW 500 Administration Manual page 148

Configuring Device Security
Defining 802. 1 x
STEP 1
ESW 500 Series Switches Administration Guide
Click Security > 802. 1 X > Properties. The
802.1X Properties Page
The 802. 1 X Properties Page
•
Port Based Authentication State — Enables Port-based Authentication on the
device. The possible field values are:
-
Enable
— Enables port-based authentication on the device.
-
Disable
— Disables port-based authentication on the device.
•
Authentication Method — Defines the user authentication methods. The
possible field values are:
-
RADIUS, None
RADIUS server. If no response is received from RADIUS (for example, if
the server is down), then the
permitted
.
-
RADIUS
— Authenticates the user at the RADIUS server.
-
None
— No authentication method is used to authenticate the port.
•
Guest VLAN — Specifies whether the Guest VLAN is enabled on the device.
The possible field values are:
802. 1 X Properties Page
contains the following fields:
— Indicates port authentication is performed first via the
None
option is used, and the session is
5
opens:
137