Resetting Etherlike Statistics Counters; Viewing Gvrp Statistics - Cisco ESW 500 Administration Manual

Viewing Statistics
Viewing Ethernet Statistics
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
-
60 Sec
— Indicates that the Etherlike statistics are refreshed every 60
seconds.
-
No Refresh
•
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors
received on the selected interface.
•
Single Collision Frames — Displays the number of single collision frames
received on the selected interface.
•
Late Collisions — Displays the number of late collision frames received on the
selected interface.
•
Excessive Collisions — Displays the number of excessive collision frames
received on the selected interface. (Available on non-gigabit switches only)
•
Oversize Packets — Displays the number of oversized packets (over 1518
octets) received on the interface since the page was last refreshed.
•
Internal MAC Receive Errors — Displays the number of internal MAC received
errors on the selected interface
•
Received Pause Frames — Displays the number of received paused frames on
the selected interface.
•
Transmitted Pause Frames — Displays the number of paused frames
transmitted from the selected interface.

Resetting Etherlike Statistics Counters

Click Statistics > Ethernet > Etherlike. The
Click the Clear Counters button. The interface statistics counters are cleared.

Viewing GVRP Statistics

GVRP Page
The contains statistics for GVRP communication on the device.
To view GVRP statistics:
— Indicates that the Etherlike statistics are not refreshed.
Etherlike Page
17
opens:
390