Table of Contents
Advertisement
Page 194 of 302
Add an ITG node on MAT /OTM by retrieving an existing
node
553-3001-204 Preliminary 0.10 August 2000
ITG line card 2.0 administration
Use this optional procedure in the following cases:
•
Add existing nodes to a particular MAT/OTM ITG PC to manage the
ITG network from a single point of view.
•
Restore the ITG configuration database to a MAT/OTM ITG PC whose
hard drive had crashed, as an alternative to restoring the MAT/OTM ITG
nodes from the MAT/OTM Disaster Recovery Backup.
When you install and configure the ITG node manually, you can then add that
node to another MAT/OTM ITG PC by retrieving the configuration data from
the existing ITG node.
Make sure that you configure the site name, system name, and customer
number in the MAT/OTM Navigator before you can add a new ITG node.
Only one ITG node can be added in the MAT/OTM ITG application for each
Meridian 1 customer.
Note: If multiple MAT/OTM ITG PCs are used to manage the same ITG
network, care must be taken to synchronize the different copies of the
ITG database. The MAT/OTM ITG
Configuration | Synchronize | Retrieve
synchronize the MAT/OTM ITG database with the database on the ITG
node.
Procedure 41
Configuring the node and Leader 0
1
Launch the Meridian Administration Tools application on the
MAT/OTM PC.
2
From the "MAT/OTM Navigator" window, double-click the ITG IP
Phones icon from the "Services" folder. The "IP Telephony Gateway -
IP Phone" window opens.
3
In the "IP Telephony Gateway - IP phone" window, click the
Configuration menu and select Node, then Add.
4
When the Add ITG Node dialog box (see Figure 33) appears, click
"Retrieve the active configuration from an existing remote node" and
click OK. The Retrieve ITG Node window opens (see Figure 34).
function can be used to
Advertisement
Chapters
Table of Contents
