Nortel i2004 Getting Started

The i2004 Internet Telephone
CAUTION
Severe damage to your i2004 Internet
Telephone will occur if this set is
plugged into an ISDN connection.
Consult your system administrator to
ensure that you are plugging your set
into a 10/100 BaseT Ethernet jack.
Connecting the i2004 Internet Telephone
To connect the i2004 Internet Telephone,
follow these steps:
Step 1:
Connect one end of the handset cord to the-
handset jack on the telephone base, and
connect the other end of the handset cord to
the handset.
Component for
Future Expansion Ethernet Port
Manufacturing Headset Jack
Information
Using Your i2004 Internet Telephone
The i2004 Internet Telephone gives you
multiple options to make a call. Each of
these options is described in detail in your
system- specific User Guide.
n Installation
Step 2:
Connect one end of the line cord to the
telephone base and connect the other end
of the line cord to an IP voice network, using
a CAT-5 cable with an RJ45 connector.
Step 3:
Plug the AC Power adapter into the base of
the telephone, and plug the adapter into the
nearest outlet. Check your system-specific
User Guide for country-specific parameters.
AC Power Adapter MAC Address
Plug
Label
Handset Jack
You can view the i2004 Internet Telephone
User Guide by logging on to the internet at
http://www.nortelnetworks.com/i2004usermanual
Printed in Canada