Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual page 92

Page 92 of 302 Installation and configuration summary
553-3001-204 Preliminary 0.10 August 2000
Configure ITG line card properties. Refer to Procedure 10 on
b
page 131.
Configure DSP Profile data. Refer to Procedure 11 on
c
page 134.
Configure E-LAN IP address and T-LAN Voice port. Refer to
d
Procedure 12 on page 135.
Configure security for SNMP access. Refer to Procedure 13 on
e
page 137.
f Configure SNMP traps . Refer to Procedure 14 on page 138.
Configure alarm notification feature. Refer to Procedure 15 on
g
page 140.
6 Transmit ITG line card configuration data from MAT to the ITG cards
a Set Leader 0 IP Address. Refer to Procedure 16 on page 146.
Transmit node and card properties to Leader 0. Refer to
b
Procedure 17 on page 148.
c Transmit card properties to all cards in the node . Refer to
Procedure 18 on page 150.
7 Upgrade card software and i2004 Internet telephone firmware
Verify card software and i2004 set firmware release. Refer to
a
Procedure 19 on page 151.
b Determine latest software and firmware versions from M1
ESD website. Refer to Procedure 20 on page 152.
Upgrade ITG Line card software (if required). Refer to
c
Procedure 21 on page 153.
Upgrade i2004 Internet telephone firmware (if required). Refer
d
to Procedure 23 on page 156.
8 Assemble and install an i2004 Internet Telephone. Refer to
Procedure 25, "Manual first-time installation of the i2004 Internet
Telephone" on page 169; and to the Meridian 1 Internet Telephone
i2004 User Guide, version 1.0.
—————————— End of Procedure ——————————