Table of Contents
Advertisement
4
Valid options are one or two servers (0 or 3 is not allowed). However, it
is recommended that the two server option be used. For i2004 Internet
Telephone firmware version 3002B00, the valid option is two servers.
Note: If there is only one connect server (i.e. only one ITG 2.0 node is
configured), enter the same information for server 1 and server 2.
5
Action code values:
0- reserved
1- UNIStim Hello (currently only this type is a valid choice)
2..254 - reserved
255 - reserved
6
iii,jjj,kkk,lll are ASCII encoded, decimal numbers representing the IP
address of the server. They do not need to be three digits long as the. and
: delimiters will guarantee parsing. For example, '001', '01' and '1' would
all be parsed correctly and interpreted as value 0x01 internal to the i2004.
Note that these fields must be no more than 3 digits long each.
7
ppppp is the port number in ASCII encoded decimal. It does not need to
be 5 digits long as the : and , delimiters will guarantee parsing. For
example, '05001', '5001', '1', '00001' etc. would all be parsed correctly
and accepted as correct. The valid range is 0-65535 (stored internally in
i2004 as hexadecimal in range 0..0xFFFF). Note that this field must be
no more than 5 digits long.
8
In all cases, the ASCII encoded numbers are treated as decimal values
and all leading zeros are ignored. More specifically, a leading zero does
not change the interpretation of the value to be OCTAL encoded. For
example, 0021, 021 and 21 are all parsed and interpreted as decimal 21.
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
Configuration of the DHCP server
Page 107 of 302
Advertisement
Chapters
Table of Contents
