Access The Command Line From Mat - Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual

Access the command line from MAT

ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
7 Use the Overlay 32 ENLC command to re-enable the ITG Line 2.0
card.
8 In the "IP Telephony Gateway" main window, select View | Refresh.
The card status now shows "Enabled."
9 Update the Installation Summary Sheet with the new MAC address.
10 Verify the TN, management interface MAC address and IP address for
each ITG Line 2.0 card. Compare the displayed values with those on
the ITG Installation Summary Sheet.
—————————— End of Procedure ——————————
Procedure 48
Telnet to an ITG Line 2.0 card
1 In the "MAT/OTM Navigator" window select the ITG IP Phones icon
from the "Services" folder.
2 In the "IP Telephony Gateway - IP Phones" window click the right
mouse button on the ITG Line 2.0 card that you wish to access and
select Card | Telnet to IP Telephony Gateway Line 2.0 card from the
popup menu.
3 Enter the default user name and password: itgadmin.
The MAT/OTM PC opens a Telnet window and automatically connects
to the ITG Line 2.0 card by using the management IP address. After
entering a username and password, the ITG shell command-line
interface is accessed from the MAT/OTM PC.
—————————— End of Procedure ——————————
ITG Line card 2.0 maintenance Page 217 of 302