Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual page 125

Table 22
LD 11 Configure i2004 Internet Telephone (Part 2 of 2)
Prompt
... ...
CLS aaaa
KEY xx aaa yy zz...zz
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
Installation and configuration of ITG Line 2.0 node
Response
...
ADD - Automatic Digit Display, default for i2004 Internet
Telephone
(HFD), HFA - Handsfree Denied, Allowed
All default classes of service are:
CLS CTD FBD WTA LPR MTD FND HTD ADD HFD GRLD
MWD RMMD SMWD AAD IMD XHD IRD NID OLD
POD DSX VMD CCMSD CCSD SWD LND CNDD
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED
RCBD ICDD CDMD LLCN MCTD CLBU AUTU GPUD
DPUD DNDD CXFD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID AHD DDGA NAMA
USMD USRD ULAD CCBD RTDD RBDD RBHD PGND
OCBD FLXD FTTC DNDY DNO3
Telephone function key assignments where:
xx = Keys 0 - 5. These are self-labeled physical keys that
can be programmed with any feature.
aaa = Key name or function
yyy, zzz = additional information required for the key.
Note: Keys 16 - 26 are reserved for dedicated i2004 soft keys.
aaa can be:
AAG AAK ACD ACNT ADL AGT AMG ACD AO3* AO6*
ARC ASP AWC BFS CA CAS CFW* CH D CH L CHG*
COS, CPN* CS, CWT LNK MCK MCN MCR MIK MMM
MRK MSB MWK* NHC NRD NSVC NUL OBV OVB
OVR PRK* PRS* PVN, PVR RAG RDL RGA* RMK
RNP* SCN SIG SCU* SSU* SCC* SSC* THF TRC
TRN* USR UST VCC WUK
*Reserved for a dedicated i2004 Internet Telephone key.
See Table 23.
Description
Page 125 of 302