Delete an ITG Line 2.0 card from the node
Change an IP address
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
Procedure 37
Deleting an ITG Line card from the node
1
In the "MAT/OTM Navigator" window select the ITG IP Phones icon
from the "Services" folder.
2
If the ITG Line 2.0 card to be deleted is a Leader 0 or Leader 1, then:
• Telnet to the card.
• Enter the clearLeader command from the ITG shell.
3
In the "IP Telephony Gateway - IP Phones" window, select Node |
Properties from the popup menu. The ITG Node Properties window is
displayed.
4
Click the "Configuration" tab.
5
Select the ITG Line 2.0 card to be deleted from the list.
6
Click the Delete button.
7
Click OK.
8
Remove the ITG Line 2.0 cards via the MAT/OTM System Passthru
terminal, ESN MAT/OTM application, or via a Meridian 1 system
management terminal directly connected to a TTY port on the Meridian
1. Use Overlay 11.
—————————— End of Procedure ——————————
Procedure 38
Changing the IP address of an ITG line card
1
Click Configuration | Node | Properties. Update the ITG Line 2.0
card IP addresses as required.
2
When all updates to the IP addresses have been made, click Apply
then OK in the "ITG Node Properties" window.
The node properties are transmitted to the Leader 0 card:
3
Select the Leader 0 ITG Line 2.0 card in the IP Telephony Gateway -
IP Phones window.
4
Click the Configuration menu, then Synchronize, then Transmit.
ITG line card 2.0 administration
Page 191 of 302