Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual page 272

Page 272 of 302
ITG0100 Successful bootup. All alarms cleared.
ITG0101 Exit form QoS fallback. Normal operation restored.
ITG0102 Ethernet voice port restored to normal operation.
ITG0103 Ethernet management port restored to normal operation.
ITG0104 DSP successfully reset.
ITG0105 Exit from card fallback. Leader card restored.
ITG0150 D-channel restored. Channels restored to service.
ITG0200 Voice Ethernet buffer exceeded. Packet(s) discarded.
ITG0201 Management Ethernet buffer exceeded. Packet(s) discarded.
ITG0202 Card recovered from software reboot.
ITG0203 Fallback to PSTN activated.
ITG0204 DSP device reset.
ITG0206 Invalid A07 message received. Message discarded.
ITG0207 Unknown H.323 message received. Message discarded/rejected.
ITG0208 Backup leader has been activated.
ITG0250 Invalid X12 message received. Message discarded.
ITG0300 Memory allocation failure.
ITG0301 Channel not responding. Channel is disabled.
ITG0302 DSP device failure. Operating on reduced capacity.
ITG0303 DSP subsystem failure. Initiating card reboot.
ITG0304 Cannot write to file I/O write error.
ITG0305 Cannot open configuration file. Using default settings.
ITG0306 Meridian Messaging error threshold exceeded.
ITG0308 Address Translation failure. Call is released.
553-3001-204 Preliminary 0.10 August 2000