Table of Contents
Advertisement
Installation and configuration of ITG Line 2.0 node
8
Click on the pdf file in the Documentation column to download the text
file associated with the latest card software.
9
Open the readme.txt file that contains the version number of the latest
card software and associated i2004 firmware.
—————————— End of Procedure ——————————
Procedure 21
Upgrade ITG Line card software from the web
1
If not already open, from the MAT/OTM PC open a web browser and
connect to the following URL address:
http://www.nortelnetworks.com/servsup/esd/meridian1/
2
When you are connected to the site, enter the username and
password.
Note: If you are not registered with the M1 ESD website, refer to the
generic Release 25 product bulletin for directions on how to register.
3
Select the latest recommended software version files and the location
on the MAT/OTM PC hard drive to where it is to be downloaded.
Record the MAT/OTM PC hard drive location for use later in the
procedure.
4
Download and unzip the software file.
5
Open MAT/OTM and launch the "ITG IP Phones" application, if it is not
already open.
6
Select the ITG cards from the main card list view that are to be
upgraded. Upgrade all the cards in the node together, unless you are
installing a spare card that has older software.
7
Disable all ITG Line 2.0 cards to be upgraded. Use the Meridian 1
Overlay 32 DISI command from MAT/OTM Maintenance Windows, the
MAT/OTM System Passthru terminal, or from a Meridian 1 system
management terminal directly connected to a TTY port on the
Meridian 1.
8
In the MAT/OTM "IP Telephony Gateway - IP Phone" main window,
select View | Refresh and verify that the card status is showing
"Disabled."
9
Select Configuration | Synchronize | Transmit. The "ITG - Transmit
Options" dialog box is displayed.
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
Page 153 of 302
Advertisement
Chapters
Table of Contents
