Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual page 249

Figure 40
Remote support using Netgear RM356 modem router
MAT / OTM
PSTN
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
T-LAN
E-LAN
Core 0
Core 1
Netgear RM 356
Modem Router
3 Connect the modem router to the AC power source. The power LED
will light. After several seconds, the test LED flashes slowly four times,
then stays off.
For each of the four 10BaseT ports on the integrated hub there is a
link/data LED that is lit steadily to indicate a good received link (if a
cable is connected to a host or hub), or flashing, to indicate data
received on the LAN.
4 Connect the RJ45 plug end of the local manager cable to the RS232
Manager port RJ45 jack on the rear of the modem router.
Hub
C -LAN
Router
Hub
Page 249 of 302
I2004
PC
DHCP Server