Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual page 227

Table 34
ITG Line 2.0 ITGL shell commands (Part 4 of 6)
=>Command
prevOmFilePut "hostname",
"username", "password",
"directory path", "filename"
Example:
traceFilePut "hostname",
"username", "password",
"directory path", "filename"
Example:
LogFilePut "hostname",
"username", "password",
"directory path", "filename"
Example:
bootPFilePut "hostname",
"username", "password",
"directory path", "filename"
Example:
hostFilePut "hostname",
"username", "password",
"directory path", "filename",
ITGFileName
Example:
fwFilePut
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
ITG Line card 2.0 maintenance
The omFilePut task on the ITG host initiates an FTP
session with the given parameters and downloads the ITG
Line 2.0 card's operational measurements file to the
specified location on the host.
ITGL> prevOmFilePut "ngals042", "anonymous", "guest",
"/prevDir", "omFile"
The traceFilePut task on the ITG host initiates an FTP
session with the given parameters and downloads the ITG
Line 2.0 card's call trace file to the specified location on the
host.
ITGL> traceFilePut "ngals042", "anonymous", "guest",
"/trcDir", "trcFile"
The logFilePut task on the ITG host initiates an FTP
session with the given parameters and downloads the ITG
Line 2.0 card's logfile the to specified location on the host.
ITGL> currLogFilePut "ngals042", "anonymous", "guest",
"/currDir", "logFile"
Sends the bootptab file from the ITG Line 2.0 card to
MATMAT/OTM.
ITGL> bootPFilePut "ngals042", "anonymous", "guest",
"/bootpDir", "bootpFile"
Transfers any file from the ITG Line 2.0 card to the
MAT/OTM PC.
ITGL> hostFilePut "ngals042", "anonymous", "guest",
"/hostDir", "hostFile", "/C:/CONFIG/CONFIG1.INI"
Transfer the firmware file from the ITG Line 2.0 card to the
i2004 Internet Telephone.
Description
Page 227 of 302