Identify The Ipe Card Slots - Nortel Meridian ITG Line 2.0 Description, Installation And Operation Manual

For Option 11C or 11C MiniC systems, the standard I/O filter connector
already supports 100BaseTX. Refer to "Install NTCW84JA Large System
ITG-specific I/O Panel Filter Connector" on page 115 for installation
instructions.
For Meridian 1 large systems manufactured during the period of
1998-1999 and shipped in North America, the IPE modules have the
NT8D81BA Backplane to I/O Panel ribbon cable assembly with a
non-removable Filter Connector. The NT8D81BA is compatible with
10BaseT T-LAN, but if you require a 100 BaseT T-LAN, you need to
order and install the NT8D81AA Backplane to I/O Panel ribbon cable
assembly. Do not try to install the NTCW84JA Filter Connector onto
the existing non-removable Filter Connector.
If required for your site, turn to See "Replace cable NT8D81BA with
NT8D81AA" on page 243.

Identify the IPE card slots

Identify the IPE card slots selected for ITG Line 2.0 card.
Table 9
ITG installation by module type
NT8D37BA/EC IPE modules,
NT8D11BC/ED CE/PE modules
NT8D37AA/DC IPE modules
NT8D11AC/DC CE/PE modules
ITG Line 2.0/i2004 Internet Telephone Description, Installation, and Operation
Meridian 1 capacity engineering guidelines
CAUTION
Meridian 1 Modules
Page 51 of 302
ITG Card Slots
All available IPE card slots.
0, 4, 8, and 12
0