Traceroute; Enabling Rstp; Figure 166 Traceroute Command Example - ZyXEL Communications GS-4012F/4024 User Manual

GS-4012F/4024 User's Guide

41.4 traceroute

Syntax:
where
<ip>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ttl <1-255>]
[wait <1-60>]
[quesries <1-10>] =
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100

Figure 166 traceroute Command Example

ras> traceroute 192.168.1.100
traceroute to 192.168.1.100, 30 hops max, 40 byte packet
1:192.168.1.100 (10 ms) (10 ms) (0 ms)
traceroute done:

41.5 Enabling RSTP

To enable RSTP on a port. Enter
.
[ENTER]
The following example enables RSTP on port 10.
273
traceroute <ip> [in-band|out-of-band|vlan <vlan-id>][ttl <1-
255>] [wait <1-60>] [queries <1-10>]
The IP address of an Ethernet device.
=
Specifies the network interface or the VLAN ID to which the
=
Ethernet device belongs.
Specifies the Time To Live (TTL) period.
=
Specifies the time period to wait.
=
Specifies how many tries the switch performs the traceroute
function.
.
spanning-tree
followed by the port number and press
Chapter 41 Command Examples