ZyXEL Communications GS-4012F/4024 User Manual page 253

GS-4012F/4024 User's Guide
Table 95 Command Summary: Configuration Mode (continued)
COMMAND
radius-server
remote-management
router
service-control
snmp-server
spanning-tree
ssh
253
<port-list>
<port-list> learn
inactive
<index>
<index> service
<telnet| ftp|
http| icmp| snmp|
ssh| https>
dvmrp
igmp
ospf
rip
vrrp network <ip-
address>/<mask-
bits> vr-id <1-7>
ftp
http
https
icmp
snmp
ssh
telnet
trap-destination
<ip>
<port-list>
key
<rsa1|rsa|dsa>
known-hosts
<host-ip>
Chapter 40 Introducing the Commands
DESCRIPTION
Disables port security on the
specified ports.
Enables MAC address learning
on the specified ports.
Disables the use of
authentication from the RADIUS
server.
Clears a secure client set entry
from the list of secure clients.
Disables a secure client set
entry number from using the
selected remote management
service.
Disables DVMRP on the switch.
Disables IGMP on the switch.
Disables OSPF on the switch.
Disable RIP on the switch.
Deletes VRRP settings.
Disables FTP access to the
switch.
Disables web browser control to
the switch.
Disables secure web browser
access to the switch.
Disables ICMP access to the
switch such as pinging and
tracerouting.
Disables SNMP management.
Disables SSH (Secure Shell)
server access to the switch.
Disables telnet access to the
switch.
Disables sending of SNMP
traps to a station.
Disables STP.
Disables STP on listed ports.
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
Removes the specified remote
hosts from the list of all known
hosts.