Spq; Wrr; Figure 186 Frame-Type Command Example; Figure 187 Spq Command Example - ZyXEL Communications GS-4012F/4024 User Manual

Figure 186 frame-type Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check
ras(config-interface)# frame-type tagged

41.8.10 spq

Syntax:
Sets the interface to use Strict Priority Queuing.
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable VLAN Trunking on the ports.

Figure 187 spq Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# spq

41.8.11 wrr

Syntax:
where
<wt1> <wt2> ...
<wt8>
An example is shown next.
• Enable port two and ports six to twelve for configuration.
• Enable Weighted Round Robin queuing on the ports.
• Set the queue weights from Q0 to Q7.
Chapter 41 Command Examples
spq
wrr <wt1> <wt2> ... <wt8>
Enables WRR (Weighted Round Robin) queuing method on the switch.
Sets the interface to use WRR queuing. A weight value of one to eight is
given to each variable from
GS-4012F/4024 User's Guide
to .
wt1 wt8
284