ZyXEL Communications GS-4012F/4024 User Manual page 248

Table 95 Command Summary: Configuration Mode (continued)
COMMAND
bcp-
transparency
classifier <name> <[packet-
format
<802.3untag|802.3tag
| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>] [source-
port <port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ] [ip-
protocol <protocol-
num|tcp|udp|icmp|egp
| ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-ip-
addr> [mask-bits
<mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-socket
<socket-num>]
[inactive]>
help
cluster <vlan-id>
member <mac-address>
password <password-
str>
name <cluster name>
rcommand <mac-
address>
default- <in-band|out-of-
management band>
Chapter 40 Introducing the Commands
GS-4012F/4024 User's Guide
DESCRIPTION
Enables Bridge Control Protocol
(BCP) transparency.
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
Displays help information for
this command.
Enables clustering in the
specified VLAN group.
Sets the cluster memeber.
Sets a descriptive name for the
cluster.
Logs into the CLI of the
specified cluster member.
Specifies through which traffic
flow the switch is to send
packets.
248