ZyXEL Communications GS-4012F/4024 User Manual page 260

Table 95 Command Summary: Configuration Mode (continued)
COMMAND
priority <0-61440>
ssh known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
storm-control
time <Hour:Min:Sec>
date <month/day/
year>
help
timezone <-
1200|...|1200>
timesync <daytime|time|ntp>
server <ip>
trunk <T1|T2|T3|T4|T5|T6>
<T1|T2|T3|T4|T5|T6>l
acp
<T1|T2|T3|T4|T5|T6>i
nterface <port-list>
interface <port-
list> timeout <lacp-
timeout>
vlan <1-4094>
vlan1q gvrp
port-isolation
vlan-stacking
<SPTPID>
vlan-type <802.1q|port-based>
Chapter 40 Introducing the Commands
GS-4012F/4024 User's Guide
DESCRIPTION
Sets the bridge priority of the
switch.
Adds a remote host to which the
switch can access using SSH
service.
Enables broadcast storm
control on the switch.
Sets the time in hour, minute
and second format.
Sets the date in year, month
and day format.
Displays help information.
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
Sets the time server protocol.
Sets the IP address of your time
server.
Activates a trunk group.
Enables LACP for a trunk
group.
Adds a port(s) to the specified
trunk group.
Defines the port number and
LACP timeout period.
Enters the VLAN configuration
mode. See Section 40.9.6 on
page 265 for more information.
Enables GVRP.
Enables port-isolation.
Enables VLAN stacking on the
switch.
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
Specifies the VLAN type.
260