Ospf Virtual Links - ZyXEL Communications GS-4012F/4024 User Manual

Table 60 OSPF Interface (continued)
LABEL
Key
Cost
Add
Cancel
Clear
Index
Network
Area ID
Authentication This field displays the authentication method used (Same-as-Area, None, Simple or
Key ID
Cost
Apply
Cancel

25.6 OSPF Virtual Links

Configure and view virtual link settings in the OSPF Virtual Link screen.
In the OSPF Configuration screen, click Virtual Link to display the screen as shown next.
Chapter 25 OSPF
DESCRIPTION
When you select Simple in the Authentication field, enter a password eight-character
long. Characters after the eighth character will be ignored.
When you select MD5 in the Authentication field, enter a password 16-character long.
The interface cost is used for calculating the routing table. Enter a number between 0
and 65535.
Click Add to apply the changes.
Click Cancel to start configuring the above fields again.
Click Clear to set the above fields back to the factory defaults.
This field displays the index number for an interface.
This field displays the IP interface information.
This field displays the area ID (that uses the format of an IP address in dotted decimal
notation) of an area to associate the interface to that area.
MD5).
When the Authentication field displays MD5, this field displays the identification
number of the key used.
This field displays the interface cost used for calculating the routing table.
Click Apply to save the changes.
Click Cancel to start configuring the above fields again.
GS-4012F/4024 User's Guide
168