ZyXEL Communications GS-4012F/4024 User Manual page 259

GS-4012F/4024 User's Guide
Table 95 Command Summary: Configuration Mode (continued)
COMMAND
service-control ftp <socket-number>
http <socket-number>
<timeout>
https <socket-
number>
icmp
snmp
ssh <socket-number>
telnet <socket-
number>
snmp-server [contact <system
contact>] [location
<system location>]
get-community
<property>
set-community
<property>
trap-community
<property>
trap-destination
<ip>
spanning-tree
<port-list>
<port-list> path-
cost <1-65535>
<port-list> priority
<0-255>
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-30>
help
259
preempt
primary-virtual-
ip <ip>
priority <1-254>
secondary-
virtual-ip <ip>
Chapter 40 Introducing the Commands
DESCRIPTION
Enables preemption mode.
Sets the primary VRRP virtual
gateway IP address.
Sets the priroity of the uplink-
gateway.
Sets the secondary VRRP
virtual gateway IP address.
Allows FTP access on the
specified service port.
Allows HTTP access on the
specified service port and
defines the timeout period.
Allows HTTPS access on the
specified service port.
Allows ICMP management
packets.
Allows SNMP management.
Allows SSH access on the
specified service port.
Allows Telnet access on the
specified service port.
Sets the geographic location
and the name of the person in
charge of this switch.
Sets the get community.
Sets the set community.
Sets the trap community.
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
Enables STP on the switch.
Enables STP on a specified
port.
Sets the STP path cost for a
specified port.
Sets the priority for a specified
port.
Sets Hello Time, Maximum Age
and Forward Delay.
Displays help information.