Enabling Ospf And General Settings; Table 56 Ospf Status: Common Output Fields - ZyXEL Communications GS-4012F/4024 User Manual

GS-4012F/4024 User's Guide
The following table describes some common output fields.

Table 56 OSPF Status: Common Output Fields

FIELD
Interface
Internet Address
Area
Router ID
Transmit Delay
State
Priority
Designated
Router
Backup
Designated
Router
Time Intervals
Configured
Neighbor Count
Adjacent
Neighbor Count
Neighbor
Neighbor ID
Pri
State
Dead Time
Address
Interface
Link State Database
Link ID
ADV Router
Age
Seq #
Checksum
Link Count

25.3 Enabling OSPF and General Settings

To activate OSPF and set general settings, click IP Application, OSPF and the
Configuration link to display the OSPF Configuration screen.
163
DESCRIPTION
This field displays the IP address and subnet bits of an IP routing domain.
This field displays the area ID.
This field displays the unique ID of the switch.
This field displays the transmission delay in seconds.
This field displays the state of the switch (backup or DR (designated router)).
This field displays the priority of the switch. This number is used in the designated
router election.
This field displays the router ID of the designated router.
This field displays the router ID of a backup designated router.
This field displays the time intervals (in seconds) configured.
This field displays the number of neighbor routers.
This field displays the number of neighbor router(s) that is adjacent to the switch.
This field displays the router ID of the neighbor.
This field displays the priority of the neighbor. This number is used in the
designated router election.
This field displays the state of the neighbor (backup or DR (designated router)).
This field displays the dead time in seconds.
This field displays the IP address of a neighbor.
This field displays the MAC address of a device.
This field displays the ID of a router or subnet.
This field displays the IP address of the layer-3 device that sends the LSAs.
This field displays the time (in seconds) since the last LSA was sent.
This field displays the link sequence number of the LSA.
This field displays the checksum value of the LSA.
This field displays the number of links in the LSA.
Chapter 25 OSPF