GS-4012F/4024 User's Guide
where
<vlan-id>
This command deletes the specified VLAN ID entry from the static VLAN table. The
following example deletes entry 2 in the static VLAN table.
Figure 202 no vlan Command Example
ras (config)# no vlan 2
42.6 Enable VLAN
Syntax:
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
42.7 Disable VLAN
Syntax:
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
42.8 Show VLAN Setting
Syntax:
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
• For the
port and "F" is a fixed port.
• For the
295
The VLAN ID [1 – 4094].
=
vlan <vlan-id>
vlan <vlan-id>
inactive
show vlan
section of the last column, "-" is a port set to normal, "x" is a forbidden
AdCtl
section of the last column, "T" is a tagged port, "U" is an untagged port.
TagCtl
Chapter 42 IEEE 802.1Q Tagged VLAN Commands