ZyXEL Communications GS-4012F/4024 User Manual page 250

Table 95 Command Summary: Configuration Mode (continued)
COMMAND
route-domain <ip-
address>/<mask-bits>
ip address
name-server
route
lacp
system-priority
loginPrecedence <LocalOnly |
LocalRADIUS |
RADIUSOnly>
logins username <name>
password <pwd>
logout
mac-aging-time <10-3000>
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop <src/
dst/both>
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
mirror-port
<port-num>
mode zynos
Chapter 40 Introducing the Commands
<ip> <mask>
default-gateway
<ip>
<ip>
<ip> <mask>
<next-hop-ip>
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
<1-65535>
inactive
inactive
GS-4012F/4024 User's Guide
DESCRIPTION
Enables a routing domain for
configuration. See Section
40.9.5 on page 264 for more
details.
Sets the IP address and subnet
mask of the out-of-band
management port.
Sets the default gateway's IP
address for the out-of-band
management port.
Sets the IP address of a domain
name server.
Creates a static route.
Sets the metric of a static route
or deactivates a static route.
Enables Link Aggregation
Control Protocol (LACP).
Sets the priority of an active port
using LACP.
Select which database the
switch should use (first) to
authenticate a user.
Configures up to four read-only
login accounts.
Exits from the CLI.
Sets learned MAC aging time.
Configures a static MAC
address port filtering rule.
Disables a static MAC address
port filtering rule.
Configures a static MAC
address forwarding rule.
Disables a static MAC address
forwarding rule.
Enables port mirroring.
Enables port mirroring on a
specified port.
Changes the CLI mode to the
ZyNOS format.
250