Traceroute Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Traceroute Commands

92.1 Traceroute Overview
Traceroute is a tool to display the path a packet takes between two endpoints.
92.2 Command Summary
The following section lists the commands for this feature.
Table 210 traceroute Command Summary
COMMAND
traceroute <ip|host-name> [vlan
<vlan-id>] [ttl <1-255>] [wait
<1-60>] [queries <1-10>]
traceroute help
traceroute6 <ipv6-addr|host-
name> <[ttl <1-255>] [wait <1-
60>] [queries <1-10> ]>
traceroute6 help
DESCRIPTION
Displays the path a packet takes to the specified Ethernet
device with an IPv4 address.
vlan <vlan-id>: Specifies the VLAN ID to which the
Ethernet device belongs.
ttl <1-255>: Specifies the Time To Live (TTL) period. This is
to set the maximum number of the hops (routers) a packet
can travel through.
wait <1-60>: Specifies the time period to wait for a
response to a probe before running another traceroute.
queries <1-10>: Specifies how many times the Switch
performs the traceroute function.
Provides more information about the specified command.
Displays the route a packet takes to the specified Ethernet
device with an IPv6 address.
vlan <vlan-id>: Specifies the VLAN ID to which the
Ethernet device belongs.
ttl <1-255>: Specifies the Time To Live (TTL) period. This is
to set the maximum number of the hops (routers) a packet
can travel through.
wait <1-60>: Specifies the time period to wait for a
response to a probe before running another traceroute.
queries <1-10>: Specifies how many times the Switch
performs the traceroute function.
Provides more information about the specified command.
Ethernet Switch CLI Reference Guide
329
C
H A P T E R
92
M P
E 0
E 0
E 0
E 0