Traceroute; Enabling Rstp - ZyXEL Communications VES-1616F-44 User Manual

This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
192.168.1.100
sysname# ping 192.168.1.100
sent rcvd
1
2
3
sysname#

33.4 traceroute

Syntax:
traceroute <ip> [in-band|out-of-band|vlan <vlan-id>][ttl <1-255>] [wait <1-
60>] [queries <1-10>]
where
<ip>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ttl <1-255>]
[wait <1-60>]
[quesries <1-10>] =
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100
sysname> traceroute 192.168.1.100
traceroute to 192.168.1.100, 30 hops max, 40 byte packet
1:192.168.1.100 (10 ms) (10 ms) (0 ms)
traceroute done:

33.5 Enabling RSTP

Syntax:
snapping-tree [port-number]
Chapter 33 Command Examples
.
rate rtt avg
1 100 0
2 100 0
3 100 0
The IP address of an Ethernet device.
=
Specifies the network interface or the VLAN ID to which the
=
Ethernet device belongs.
Specifies the Time To Live (TTL) period.
=
Specifies the time period to wait.
=
Specifies how many tries the switch performs the traceroute
function.
.
VES-1616F/1624F-44 User's Guide
mdev max
0 0 0
0 0 0
0 0 0
min reply from
0 192.168.1.100
0 192.168.1.100
0 192.168.1.100
243