No Ssh; Interface Commands; Figure 176 No Port-Access-Authenticator Command Example; Figure 177 No Ssh Command Example - ZyXEL Communications GS-4012F/4024 User Manual

Figure 176 no port-access-authenticator Command Example

ras(config)# no port-access-authenticator
ras(config)# no port-access-authenticator 1,3-5 reauthenticate
ras(config)# no port-access-authenticator 1,6-7

41.7.5 no ssh

Syntax:
where
key <rsa1|rsa|dsa>
known-hosts <host-ip>
known-hosts <host-ip>
[1024|ssh-rsa|ssh-dsa]
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
• Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption
key from the list of known hosts.

Figure 177 no ssh Command Example

ras(config)# no ssh key rsa1
ras(config)# no ssh known-hosts 172.165.1.8
ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa

41.8 interface Commands

These are some commonly used commands that belong to the
commands.
Chapter 41 Command Examples
no ssh key <rsa1|rsa|dsa>
no ssh known-hosts <host-ip>
no ssh known-hosts <host-ip> [1024|ssh-rsa|ssh-dsa]
Disables the secure shell server encryption key. Your switch
supports SSH versions 1 and 2 using RSA and DSA
authentication.
Remove specific remote hosts from the list of all known hosts.
Remove remote known hosts with a specified public key (1024-
bit RSA1, RSA or DSA).
GS-4012F/4024 User's Guide
group of
interface
278