ZyXEL Communications GS-4012F/4024 User Manual page 257

GS-4012F/4024 User's Guide
Table 95 Command Summary: Configuration Mode (continued)
COMMAND
257
area <area-id>
virtual-link
<router-id>
authentication-
key <key>
area <area-id>
virtual-link
<router-id>
authentication-
same-as-area
area <area-id>
virtual-link
<router-id>
message-digest-
key <keyid> md5
<key>
area <area-id>
virtual-link
<router-id> name
<name>
exit
network <ip-addr/
bits> area <area-
id>
no area <area-id>
no area <area-id>
authentication
no area <area-id>
default-cost
no area <area-id>
stub
no area <area-id>
stub no-summary
no area <area-id>
virtual-link
<router-id>
authentication-
key
no area <area-id>
virtual-link
<router-id>
message-digest-
key
Chapter 40 Introducing the Commands
DESCRIPTION
Enables simple authentication
and sets the authentication key
for the specified virtual link in
the area.
Sets the virtual link to use the
same authentication method as
the area.
Enables MD5 authentication
and sets the key ID and key for
the virtual link in the area.
Sets a descriptive name for the
virtual link for identification
purposes.
Leaves the router OSPF
configuration mode.
Creates an OSPF area.
Removes the specified area.
Sets the area to use no
authentication (None).
Sets the area to use the default
cost (15).
Disables stub network settings
in the area.
Sets the area to send LSAs
(Link State Advertisements).
Resets the authentication
settings on this virtual link.
Resets the authentication
settings on this virtual link.