Table of Contents
Advertisement
System board and components
14.6.2
Installing the M.2 SSD
For M.2 SSD with 110 mm
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver (for housing cover)
– Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver
For M.2 SSD with 42 and 80 mm
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver (for housing cover)
– Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver
Preliminary steps
For M.2 SSD with 110 mm
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Removing the server from the rack" on page
▶
"Getting access to the component" on page
▶ Remove the air duct from the top system board, see
air duct" on page
▶
"Removing the riser module 3/4 and 6/7" on page
▶ If an expansion card is installed in slot 5, see
on page
64.
▶
"Removing the fan cage" on page
334
72.
69.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 15 minutes
Hardware: 5 minutes
Software: 15 minutes
45.
46.
49.
47.
"Removing the CPU
61.
"Removing the riser module"
RX4770 M5
Advertisement
Table of Contents
