Press Roller A - Konica Minolta BIZHUB 25E Field Engineering Manual

PRESS ROLLER A

1. Remove the Cover Tx. (See "COVER TX" on page 5-17.)
2. Remove the Guide outer A. (See "ASSY ROLLER SEPARATOR" on page 5-18.)
3. Remove two screws [1] and then remove two Springs P regist [2].
4. Remove one screw [3], then remove the Holder regist shaft [4].
5. Lift up the Shaft press roller regist [5] and remove the Press roller A [6].
[ 1 ]
[ 1 ]
[ 3 ]
[ 2 ]
[ 2 ] [ 4 ]
[ 5 ]
[ 6 ]
[ 6 ] [ 6 ]
5-19