Konica Minolta BIZHUB 25E Field Engineering Manual page 220

Error
Description
Code
2001 Connection error
1002 File read and write error
1004
1006
3019
3021
3022
Check message
Not able to be connect • Check that host name on
the network.
• Check DNS server address,
DNS suffix, and WINS server
address are set correct at
"TCP/IP settings".
• Check that the destination
computer name is registered
on DNS server.
• Check that the destination
computer registers WINS
setting correctly.
Not come by the file reading Check that the destination
and writing. shared folder is not read/
write protected.
Countermeasure
STATUS_INVALID_SMB
0x00010002
STATUS_NO_SUCH_FILE
0xC000000F
STATUS_NO_SUCH_DEVICE
0xC000000E
STATUS_OBJECT_NAME_NOT_FOUND
0xC0000034
STATUS_TOO_MANY_OPENED_FILES
0xc000011F
STATUS_SMB_BAD_FID
0x00060001
STATUS_INVALID_HANDLE
0xC0000008
STATUS_OBJECT_TYPE_MISMATCH
0xC0000024
STATUS_PORT_DISCONNECTED
0xC0000037
STATUS_INVALID_PORT_HANDLE
0xC0000042
STATUS_FILE_CLOSED
0xC0000128
STATUS_HANDLE_NOT_CLOSABLE
0xC0000235
STATUS_MEDIA_WRITE_PROTECTED
0xC00000A2
STATUS_NO_MEDIA_IN_DEVICE
0xC0000013
STATUS_DEVICE_NOT_READY
0xc00000a3
STATUS_INVALID_DEVICE_STATE
0xC0000184
4-14
NTSTATUS values
Non-specific error code, returned
under the following conditions:
resource other than disk space
exhausted (e.g. TIDs), first SMB
command was not negotiate,
multiple negotiates attempted, and
internal server error.
File not found. The last component
of file's path name could not be
found.
Too many open files. The server
has file handles available.
Invalid file handle. The file handle
specified was not recognized by
the server.
Attempt to write on write-protected
media
Drive not ready
Unknown command
Details