Machine Parameter Adjustment - Konica Minolta BIZHUB 25E Field Engineering Manual

3.2 Machine parameter adjustment

3.2.1 Setting the machine parameters
These switches are used to program internal machine parameters.
1. From standby, press <Mode>, <*>, <0>, <0>.
2. Press [Edit Parameters].
3. Call up the desired switch by pressing [Prev] or [Next] , or by pressing the numeric keys.
4. Select the desired parameter by pressing the box.
5. To navigate through the machine parameter settings:
• The bits are ranged from 7 (left) to 0 (right).
• Press [ ] or [ ] of the cursor key to move the cursor.
• Press <0> or <1> on the numeric keys, or [ ] or [ ], to change the bit value.
• Press [Enter] to save the setting of the displayed parameter and return to the machine parameter
edit screen.
• Press [Back] not to save the setting of the displayed parameter.
6. If you want to set other machine parameters, repeat step 3-5. Otherwise, proceed to step 7.
7. Press <Reset> to return the machine to ready screen.
You can confirm the setting on a list. The machine parameters list will be printed by pressing [List Pa-
rameter] in step 2.
3-3