Konica Minolta BIZHUB 25E Field Engineering Manual page 343

ADF zoom adjustment (Horizontal)
Zoom ratio
100 %
1. Load letter size paper to the first cassette.
2. Place a Test Chart in the ADF.
3. Make two copies on paper in the first cassette with 100 % magnification.
4. Measure the length of A on the second copy to find the difference.
If length A falls outside the specified range, perform the following steps to make the adjustment.
5. Enter Machine Parameter mode. (See "3.2.1 Setting the machine parameters" on page 3-3.)
6. Adjust the setting of Machine Parameter 036 to meet the specification.
If the length A is shorter than the standard, increase value.
If the length A is longer than the standard, decrease value.
Standard
± 1.0 % Machine parameter:036
A
L R
Adjustment Tool
5-93
Setting Range
– 1.27 to 1.27 %
(0.01 % step)