Sensor Pds/Swbs - Konica Minolta BIZHUB 25E Field Engineering Manual

SENSOR PDS/SWBS

1. Remove the Exit assy. (See "EXIT ASSY" on page 5-60.)
2. Remove one screw [1], then remove the Spring C FG exit [2].
3. Remove three screws [3], lift up the Guide upper exit [4] from the front and remove the Guide lower exit
[5].
[ 1 ]
[ 2 ]
[ 3 ]
[ 4 ]
[ 3 ]
[ 3 ]
[ 5 ]
3. Remove the Guide change exit [7] from the Guide lower exit [6].
[ 6 ]
[ 7 ]
5-61