Storage Maintenance - Konica Minolta BIZHUB 25E Field Engineering Manual

3.31.2 Capturing packet data from machine control panel
When you capture packets using USB memory device, a file named "tcpdump.cap" will be created on the
root. If there already exists a file with the same file name, that file will be overwritten with the new data.
1. Connect a USB memory to the machine.
2. Press <Mode>, <*>, <5>, <8>.
3. Press [Capture], and then [Yes].
4. To stop capturing, press [Stop] and then [Yes].
CAUTION
Disconnect the USB memory device after capturing has finished.

3.32 Storage maintenance

The storage on the Message Board is an SD card. The following operations are available with this function:
Storage Export :
Disable SD Storage : Permanently disables the SD card from being read to prevent data from being ac-
3.32.1 Storage export
Important
Use this feature in following cases:
• To replace the SD card from a standard card to an optional card
• When the SD card has become not-write-able.
1. Insert the new SD card to a card reader, and connect the card reader to the machine.
2. Press <Mode>, <*>, <5>, <9>.
3. Press [Storage Export].
4. Press [Yes].
Export the machine data to a storage device.
cessed when the unit is disposed.
3-112