Sensor Txil / Ds1 - Konica Minolta BIZHUB 25E Field Engineering Manual

Hide thumbs Also See for BIZHUB 25E:

Table of Contents

SENSOR TXIL / DS1

1. Remove the Cover Tx side B. (See "COVER TX SIDE B" on page 5-5.)

2. Disconnect each connector for the SENSOR TxIL [1] and the Sensor DS1 [2].

3. Remove the SENSOR TxIL [1] and the Sensor DS1 [2].

* There are hooks on the short side (1 place) and the long side (2 places) on the sensor.

Remove the long side first.

When assembling, please be careful to plug in the connectors correctly.

Sensor TxIL··· Harness color: Red (marked R)

Sensor DS1··· Harness color: Blue (marked B)

Table of Contents