Konica Minolta BIZHUB 25E Field Engineering Manual page 104

Memory switch 02x : Reception
Memory switch 020 :
Initial
bit
Setting
7 0 Data error rate
0 : 10%
1 : 20%
6 0 Pause one second after
sending CED
0 : No (75 ms)
1 : Yes (1 sec.)
5 1 Time between ANSam out-
put and DIS output
0 : 75 msec
1 : 450 msec
4 0 Factory use only
3 1 Receive speed (kbps)
2 1 Maximum receive speed may be slowed to compensate for poor phone lines.
1 0
0 1 2.4 4.8 7.2 9.6 12 14.4 16.8 19.2 21.6 24 26.4 28.8 31.2 33.6
0
0
0
0
Adjust
Determines the allowable number of erred lines out of total
lines received in a document.
A 2100 Hz CED signal disables echo suppression in some
telephone equipment. When set to "1", the machine pauses
one second after sending CED, which allows echo suppres-
sion to restart. This may help with problematic overseas recep-
tion.
This setting is for optical communication line.
Adjust the time between ANSam output completion and DIS
output start. (When V.8 procedure dose not start by output AN-
Sam, it moves to V.8 procedure by output DIS)
Terminal adopter turns the echo-canceler off and then on with-
in 400 ms during the silent time.
Use this adjustment to make sure that the echo-canceler is
turned on again, when the communication procedure has
moved from V.34 to T.30.
0 0 0 0 0
0 0 0 1 1
0 1 1 0 0
1 0 1 0 1
Usage / Comments
0 0 1 1 1
1 1 0 0 0
1 1 0 0 1
0 1 0 1 0
3-28
—
1 1 1
0 1 1
1 0 0
1 0 1