3.11 Monitor speaker
If you need to monitor the signal of fax communication, turn this mode to on. You can hear the signal sound
with machine's speaker during fax transaction.
1. Press <Mode>, <*>, <0>, <8>.
2. Select the monitor type from [ON until DIS] or [ON].
3. Select the speaker volume.
To turn this mode off, perform steps 1 and 2 and select [OFF].
3.12 Test modes
This mode offers the ability to print a test pattern and monitor certain unit output functions. Included are fol-
lowings.
•
Life monitor
•
Test pattern print
•
Stamp test mode
•
Document feeding test
•
Set background level
•
Make color Gamma
•
Select color Gamma
3.12.1 Life monitor
This function displays the machine status.
1. Press <Mode>, <*>, <0>, <9>, then select [Life Monitor].
2. Press [Detail] to see the options.
ROM Ver = displays main control board firmware version
Display
1
Installation Date
Scan Count
Page Count
Tx (Transmission) Count
2
Drum Replaced
Drum Life
After Replaced
Drum Start Date
Drum Serial No.
Item
Cumulative total pages
Number of times drum is replaced
Current drum working time (x 10 seconds)
Total printed pages on current drum
Date when current drum is started to user
Serial number of drum cartridge
Detail
3-81