Konica Minolta BIZHUB 25E Field Engineering Manual page 56

8 When a predetermined time passes after REGCL is turned on in step 5, PFCL turns on, and the pick up
roller feeds a paper.
9 The paper reaches the PRS, and loops at the resist roller.
10 The REGCL turns on, and the resist roller feeds the paper.
11 LED print head exposes the drum, and an image is developed then transferred to the second paper. The
image is fixed to the paper at the fuser.
12 The paper is fed by the fuser roller pairs to SWBS, and reaches PDS.
13 The SWBS turns off, Dup CL1 turns off, and then Dup CL2 turns on.
14 The Dup CL2 turns on, and exit roller runs in reverse direction. The paper is fed to PDS, SWBS and then
to the return paper path direction.
15 Dup CL2 is turns on, and 2bin motor runs in its normal direction and switches the paper path to the 2bin
tray.
16 The paper is fed to 2bin PDS and then dropped on the 2bin tray.
17 SWBS is turns off, and the Dup CL2 turns off.
18 2bin PDS is turned off, and the 2bin motor stops.
19 Devices stop working in the following order: RX1 motor and RX2 motor.
20 The machine controls the ready temperature of the fuser.
21 The fun stops.
2-8