Konica Minolta BIZHUB 25E Field Engineering Manual page 66

Fusing temperature
1) Warming Up After the initialization of the printer, warming up of the printer starts and the Heater Lamp
turns ON until the temperature of the Heater Roller reaches approx. 170 °C.
2) Printing When the printer obtains the printing command from its controller, the Heater Roller is main-
tained at 180 °C.
After printing, the printer turns to ready mode. The fuser kept at low temperature.
3) Ready The Heater Roller maintained at approx. 80 °C.
4) Energy save mode
Temperature
( F) ( C)
365 180
176 80
Warming up
Power ON
In this mode, saving the power.
Printing
Ready mode Energy save mode
2-18
Time