Roller Pickup Mp - Konica Minolta BIZHUB 25E Field Engineering Manual

ROLLER PICKUP MP

1. Remove the Cover back. (See "PCB MAIN" on page 5-34.)
2. Open the Cover jam access.
3. Pull out the cassette a little.
4. Remove the Guide DUP MP [1] by bending the shaft.
5. Remove SR5 [2] and SR4[3].
6. Remove the Clutch [4].
7. Slide the Shaft pickup MP [5] towards the front and remove it.
[ 1 ]
[ 2 ]
[ 5 ]
[ 4 ]
[ 3 ]
8. Remove the Bearing D6 8 [6] on the front side.
9. Slide the ROLLER PICKUP MP [7] by pressing the hook [8] and remove it.
5-45