Konica Minolta BIZHUB 25E Field Engineering Manual page 195

3.42.2 Updating the firmware using the network
Update the machine firmware using an ROM data prepared on a network location.
Store the ROM data on a network location in advance. See how to name the folder in which you store the
firmware on the former page.
Setup
Set up the following items to use this function. This step is required only for the first time when you use this
function.
Protocol
Path
Account
Password
Proxy Server
Proxy Port
1. Press <Mode>, <*>, <9>, <8>.
2. Press [Update from the network].
3. Press [Specifying Server].
4. Enter the items as necessary.
Update
1. Press <Mode>, <*>, <9>, <8>.
2. Press [Update from the network].
3. Press either [Update to the latest version] or [Specify with specified version].
4. When you have selected [Update to the latest version], and go to step 7.
When you have selected [Specify from list to update], press [Main Unit Version:].
5. Enter the ROM version to update, and press [Enter].
6. Press [Update].
7. Press [Yes] and the updating starts.
8. When the display shows "Firmware Updating OK", turn the machine OFF and ON.
Select the protocol from http, FTP, or SMB.
Enter the path to the firmware.
Enter the account to access the location where the firmware is stored.
Enter the password to access the location where the firmware is stored.
Enter the proxy server.
Enter the proxy server port number.
3-119