Pcb Cst - Konica Minolta BIZHUB 25E Field Engineering Manual

PCB CST

1. Remove the Cover back OP. (See "Replacement of CLUTCH CST" on page 5-79.)
2. Disconnect all the PCB CST [1] connectors.
3. Remove two screws [2] and remove the PCB CST [1].
4. Reverse the procedure to assemble.
[ 2 ]
Important
When assembling the PCB CST, insert it in the Frame PCB OP notch [3].
[ 3 ]
[ 1 ]
[ 2 ]
5-80
[ 3 ]