Cable-Assy Speaker - Konica Minolta BIZHUB 25E Field Engineering Manual

Hide thumbs Also See for BIZHUB 25E:

Table of Contents

CABLE-ASSY SPEAKER

1. Remove the Cover platen. (See "COVER PLATEN" on page 5-23.)

2. Remove the Cover top FBS. (See "CIS" on page 5-27.)

3. Remove the PCB panel assy. (See PCB PANEL ASSY.)

4. Remove the PCB PANEL. (See "PCB PANEL" on page 5-31.)

5. Remove two screws [1].

6. Remove the CABLE-ASSY SPEAKER [2].

When you reattach the speaker, be sure that a "" inscription is at the direction where the harness is.

Table of Contents