Removing And Installing The Memory Card Reader (Optional, 3½ Inch, Multicard); Installing The Memory Card Reader - Fujitsu ESPRIMO P7XX Operating Manual

Removing and installing the memory card reader
(optional, 3½ inch, MultiCard)
You can also install a memory card reader or a SmartCard reader and/or a WLAN module for
wireless LAN (Local Area Network) in the drive bay for 3½ inch drives (see
the SmartCard reader and/or WLAN module (optional, 3½-Zoll)", Page
The memory card reader can, unlike the SmartCard reader and WLAN module,
be installed directly in the device without a module holder.

Installing the memory card reader

► Push the memory card reader into the casing in the direction of the arrow (1).
► Fasten the memory card reader with the screws (2).
► Connect the cables to the memory card reader and to the mainboard.
Make sure the polarity is correct.
► Close the casing (see
Fujitsu
"Closing the casing", Page
42).
2 2
1
38).
System expansions
"Installing/removing
47