1 Setting up the starter kit
Before using this starter kit, be sure to check the components listed in Table 1-1 are fully supplied.
Before connecting the bits pot red CAN-Motor board (referred to as the board hereafter), you need to
install software in your PC. You can download the software required for the starter kit from the following
web site.
bits pot URL:
http://www.tsuzuki-densan.co.jp/bitspot/
No.
Article
1
bits pot red
CAN motor board
2
USB cable
3
BLDC Motor
4
AC adapter
5
Motor cable
6
CAN cable
7
PC
Table 1-1 Component list
Qty.
Specifications
1
Microcontroller made by Fujitsu
FR Family FR60 Lite, MB91F267N
mounted
1
USB (A to miniB)
1
Tsukasa Electronic TG-22D-F539,
12 V
1
12 V, 1 A
1
8-pin cable
1
3-pin cable
1
On which Windows XP normally
runs and USB2.0 ports are
supported
- 13 -
AN07-00180-3E
Remarks
See Figure 1-1
Accessory
Accessory
Accessory
Be sure to use the adapter
included in the kit
Accessory
Accessory
Prepare the PC by yourself.