2.2
Connection of DSU-FR Cable to Attached Cable
Connect an attached cable (FPC or flat cable) to a DSU-FR cable as shown in Figure
2.2-1 "Connection of DSU-FR Cable to FPC Cable (DSU-3)" and Figure 2.2-2
"Connection of DSU-FR Cable to Flat Cable (DSU-4)". In the factory configuration of
DSU-FR cable, a flat cable is connected.
I Connection of DSU-FR Cable to an attached Cable
Use an attached cable to connect the user system to a DSU-FR cable.
The attached cable used depends on the type of emulator interface system (DSU-3 or DSU-4)
contained in the evaluation MCU. Check the hardware manual of each evaluation MCU before
connecting the cable.
For more information on emulator interface types, see Appendix A "DSU-FR cable
Specifications".
2.2 Connection of DSU-FR Cable to Attached Cable
23